Our Line Release Driver LRD-2A is a small versatile unit and designed to be a solution to some PABX system that unable to recognize the call progress tones from CO and release the line while caller disconnects. Generally, an
interruption or reversal in loop current to be generated from CO and transmit to the associated PABX system for
properly line release while caller had already disconnected.
In case, only call progress tones occurred and the PABX Equipment unable to recognize, disconnect and abandon, the line will be kept on engaging status till the called party hand up. These cause people wasted the time to wait behind the locked lines.
The newly designed LRD-2A may be equipped between central office lines and call handling equipments (e.g. PABX or KTS system), when the unit detects one of the call progress tones, it produces a monetary interruption or reversal in loop current to the PABX system to disconnect, release and un-block the traffic line absolutely.
a. CO / PABX Line Capacity: 2 lines, and expandable in any increment by installing multiple unit
b. Call Progress Tone Response
- Frequency Range : 380 ~ 620 Hz
- Audible Tones: Range 0.12 ~ 0.8 sec. On/Off regular tone or Steady continuous Tones (exceed 4 sec.)
- Signal Level: > - 20 dbm (C.O. line), > - 10 dbm (PABX side)
c. Disconnect Signal: - Interruption duration (0.5 sec. / 1.0 sec. / 1.5 sec.)
- Reversal in loop currentd. Wiring Method: In series between CO lines and PABX trunk port
- Standard Mounting: Stand-alone cabinet - Power Requirement(from power adapter): 12V DC, 80 mA for 2 lines - Dimension / Weight: 170 mm (D) x 157 mm (W) x 54 mm (H) / 1050 GrmTo prevent CO line locking on PABX trunk while CO transfer CO calling.
To accurately count the abandoned incoming calls while counting facility or call-sequencer device equipped.
To reduce ineffective calls receiving while automated call-processing device equipped.(e.g. Voice mail or Automated operator device)
In case, only call progress tones occurred and the PABX Equipment unable to recognize, disconnect and abandon, the line will be kept on engaging status till the called party hand up. These cause people wasted the time to wait behind the locked lines.
The newly designed LRD-2A may be equipped between central office lines and call handling equipments (e.g. PABX or KTS system), when the unit detects one of the call progress tones, it produces a monetary interruption or reversal in loop current to the PABX system to disconnect, release and un-block the traffic line absolutely.
Specification
Telephone Interface
- Frequency Range : 380 ~ 620 Hz
- Audible Tones: Range 0.12 ~ 0.8 sec. On/Off regular tone or Steady continuous Tones (exceed 4 sec.)
- Signal Level: > - 20 dbm (C.O. line), > - 10 dbm (PABX side)
- Reversal in loop current
- Standard Mounting: Stand-alone cabinet - Power Requirement(from power adapter): 12V DC, 80 mA for 2 lines - Dimension / Weight: 170 mm (D) x 157 mm (W) x 54 mm (H) / 1050 Grm
