EVM  PROGRAMMING FOR CEI FX - 500

 EVM  PROGRAMMING  ITEM EVM  PROGRAMMING  DATA                EXPLANATION
 For  op / ext ring duration during
 working / closing hrs		 SYS _ 2 _ 2 _ [00],SYS _ 2 _ 3 _ [00]
 SYS _ 2 _ 4 _ [00],SYS _ 2 _ 5 _ [00]		 Un-supervisory ring back tone                  
 For release after answer SYS _ 5 _ 2 _ [5] ON HOOK
 For release w / o waiting SYS _ 5 _ 3 _ [5] ON HOOK
 For retrieving call once error tone SYS _ 5 _ 4 _ [1] HOOK FLASH
 For retrieving call once on busy SYS _ 5 _ 5 _ [1] HOOK FLASH
 For retrieving call once no answer SYS _ 5 _ 6 _ [9] The type for PBX to send out the ID    Code is : Extn+ ID Code
 For message lamp on SYS _ 5 _ 7 _ [9] Extn + Function code + Suffix code
 For message lamp off SYS _ 5 _ 8 _ [9] Extn + Function code + Suffix code
 For no-answer identified code
 ( For no-answer forward )		 SYS _ 6 _ 3 _ [ 2 ] No answer identified code is
 Extn + 2  ( For no-answer forward )
 For busy identified code
 ( For busy tone  )		 SYS _ 6 _ 4 _ [ 3099 ] Busy identified code is
 3 + Busy tone cycle
 For code of message lamp on SYS _ 6 _ 6 _ [ 812 ] Function code of message lamp ON is
 812 ( PBX Default )
 For code of message lamp off SYS _ 6 _ 7 _ [ 8120 ] Function code of message lamp OFF   is 8120 ( PBX Default )
 For Suffix code SYS _ 6 _ * _ [ *1 ] Suffix code is #
 For hook flash time SYS _ 7 _ 1 _ [By auto detection ] Refer to EVM GUIDE :
 How to auto detect hook flash time
 For busy tone cycle SYS _ 7 _ 5 _ 1 _ [057]
 SYS _ 7 _ 5 _ 2 _ [038]
 SYS _ 7 _ 5 _ 3 _ [057]
 SYS _ 7 _ 5 _ 4 _ [038]
 Data in [ ] is just a reference		 Refer to EVM GUIDE :
 How to auto detect busy tone cycle
 For ring back tone cycle SYS _ 7 _ 6 _ 1 _ [103]
 SYS _ 7 _ 6 _ 2 _ [183]
 SYS _ 7 _ 6 _ 3 _ [103]
 SYS _ 7 _ 6 _ 4 _ [183]
 Data in [ ] is just a reference		 Refer to EVM GUIDE :
 How to auto detect ring back tone  cycle
 Waiting time for ID code ADM _ 5 _ 9908 _ [ 2000 ] Delay2 sec before detecting ID code
 Prefix number of Mailbox ID code ADM _ 5 _ 9920 _ [ 9 ] Mailbox ID code is  Extn + 9
 For busy identified code
 ( For busy forward  )		 ADM _ 5 _ 9929 _ [ 1 ] Busy identified code is
 Extn + 2  ( For busy forward  )

PBX PROGRAMMING:

¡@