EVM  PROGRAMMING FOR FUJITSU 600 SERIES

 EVM  PROGRAMMING  ITEM EVM  PROGRAMMING  DATA
 For  op / ext ring duration during
 working / closing hrs		 SYS _ 2 _ 2 _ [00],SYS _ 2 _ 3 _ [00]
 SYS _ 2 _ 4 _ [00],SYS _ 2 _ 5 _ [00]
 For release after answer SYS _ 5 _ 2 _ [5]
 For release w / o waiting SYS _ 5 _ 3 _ [5]
 For retrieving call once error tone SYS _ 5 _ 4 _ [1]
 For retrieving call once on busy SYS _ 5 _ 5 _ [1]
 For retrieving call once no answer SYS _ 5 _ 6 _ [1]
 For message lamp on SYS _ 5 _ 7 _ [8]
 For message lamp off SYS _ 5 _ 8 _ [8]
 For directly pick up SYS _ 5 _ 9 _ [8]
 For no-answer identified code
 ( For External )		 SYS _ 6 _ 3 _ [ *4907 ]
 For busy identified code
 ( For External )		 SYS _ 6 _ 4 _ [ *4807 ]
 For code of message lamp on SYS _ 6 _ 6 _ [ Function code ]
 For code of message lamp off SYS _ 6 _ 7 _ [ Function code ]
 For hook flash time SYS _ 7 _ 1 _ [By auto detection ]
 For error tone cycle SYS _ 7 _ 4 _ 1 _ [235]
 SYS _ 7 _ 4 _ 2 _ [045]
 SYS _ 7 _ 4 _ 3 _ [035]
 SYS _ 7 _ 4 _ 4 _ [045]
 Data in [ ] is just a reference
 For busy tone cycle SYS _ 7 _ 5 _ 1 _ [048]
 SYS _ 7 _ 5 _ 2 _ [045]
 SYS _ 7 _ 5 _ 3 _ [048]
 SYS _ 7 _ 5 _ 4 _ [045]
 Data in [ ] is just a reference
 For ringback tone cycle SYS _ 7 _ 6 _ 1 _ [096]
 SYS _ 7 _ 6 _ 2 _ [186]
 SYS _ 7 _ 6 _ 3 _ [096]
 SYS _ 7 _ 6 _ 4 _ [186]
 Data in [ ] is just a reference
 For code of directly pick up ADM _ 5 _ 9907 _ [ Function code ]
 Waiting time for ID code ADM _ 5 _ 9908 _ [ 0000 ]
 Prefix number of Mailbox ID code ADM _ 5 _ 9920 _ [*41]
 Suffix  number of Mailbox ID code ADM _ 5 _ 9921 _ [*1]
 For no-answer identified code
 ( For Internal)		 IF Extn is 3 digits :
 ADM _ 5 _ 9928 _ [ *4406 ]
 IF Extn is 4 digits :
 ADM _ 5 _ 9928 _ [ *4407 ]
 For busy identified code
 ( For Internal )		 IF Extn is 3 digits :
 ADM _ 5 _ 9929 _ [ *4306 ]
 IF Extn is 4 digits :
 ADM _ 5 _ 9929 _ [ *4307 ]

PBX PROGRAMMING:
Command [ 100 ]  P1 [ 87 ]  P2 [ Function code ]     Set function code of message lamp ON
Command [ 100 ]  P1 [ 88 ]  P2 [ Function code ]     Set function code of message lamp OFF
Command [ 100 ]  P1 [ 106 ]  P2 [ Function code ]  Set function code of directly pick up
Command [ 102 ]  P1 [ 15 ]  P2 [ 1 ]     Message waiting for SLT applied
Command [ 102 ]  P1 [ 49 ]  P2 [ 0 ]     Filler digit for voice mail integration
Command [ 102 ]  P1 [ 111 ]  P2 [ 0 ]     Voice mail integration patterns
Command [ 102 ]  P1 [ 112 ]  P2 [ 4 ]     Digits of extension / trunk sent by the PBX is 4 digits for VMS integration
Command [ 102 ]  P1 [ 136 ]  P2 [ 1 ]     Don't send distinctive busy tone
Command [ 204 ]  P1 [ Extn ]  P2 [ 1 ]     SLT with message waiting lamp
Command [ 206 ]  P1 [ Extn of  EVM ]  P2 [ 1 ]     Set VMS port
Command [ 301 ]  P1 [ Extension hunting group number]  P2 [ 1 ]  P3 [ Extn of  EVM ]
                              P4 [ 3 ]     Set hunting group of EVM 
Command [ 307 ]  P1 [ Trunk number ]  P2 [ Extn of  EVM ]  P3 [ 0 ]     Assign direct-in line to Extn of  EVM
Command [ 319 ]  P1 [ All Extn ]  P2 [ 2 ]  P3 [ Extn of  EVM ]  P4 [ Extn of  EVM ]
                 Set  all of internal and external calls will be directly forwarded to EVM while the Extn is busy / no  answer 
                (All Extns must be preset call forward).                                                                    

¡@