EVM  PROGRAMMING FOR   IWATSU ADIX-M

EVM  PROGRAMMING  ITEMEVM  PROGRAMMING  DATA                EXPLANATION
For  op / ext ring duration during
working / closing hrs		SYS _ 2 _ 2 _ [00],SYS _ 2 _ 3 _ [00]
SYS _ 2 _ 4 _ [00],SYS _ 2 _ 5 _ [00]		Un-supervisory ringback tone                  
For release after answerSYS _ 5 _ 2 _ [5]ON HOOK
For release w / o waitingSYS _ 5 _ 3 _ [5]ON HOOK
For retrieving call once error toneSYS _ 5 _ 4 _ [1]HOOK FLASH
For retrieving call once on busySYS _ 5 _ 5 _ [1]HOOK FLASH
For retrieving call once no answerSYS _ 5 _ 6 _ [1]HOOK FLASH
For message lamp onSYS _ 5 _ 7 _ [8]Function code + Extn
For message lamp offSYS _ 5 _ 8 _ [8]Function code + Extn
For no-answer identified codeSYS _ 6 _ 3 _ [ Function code ]Refer to PBX programming
For code of message lamp onSYS _ 6 _ 6 _ [ Function code ]Refer to PBX programming
For code of message lamp offSYS _ 6 _ 7 _ [ Function code ]Refer to PBX programming
For hook flash timeSYS _ 7 _ 1 _ [By auto detection ]Refer to EVM GUIDE:
How to auto detect hook flash time
For error tone cycleSYS _ 7 _ 4 _ 1 _ [100]
SYS _ 7 _ 4 _ 2 _ [099]
SYS _ 7 _ 4 _ 3 _ [100]
SYS _ 7 _ 4 _ 4 _ [099]
Data in [ ] is just a reference		Refer to EVM GUIDE :
How to auto detect error tone cycle
For busy tone cycleSYS _ 7 _ 5 _ 1 _ [048]
SYS _ 7 _ 5 _ 2 _ [045]
SYS _ 7 _ 5 _ 3 _ [048]
SYS _ 7 _ 5 _ 4 _ [045]
Data in [ ] is just a reference		Refer to EVM GUIDE:
How to auto detect busy tone cycle
For ringback tone cycleSYS _ 7 _ 6 _ 1 _ [103]
SYS _ 7 _ 6 _ 2 _ [196]
SYS _ 7 _ 6 _ 3 _ [103]
SYS _ 7 _ 6 _ 4 _ [196]
Data in [ ] is just a reference		Refer to EVM GUIDE:
How to auto detect ringback tone cycle
Waiting time for ID codeADM _ 5 _ 9908 _ [ 1000 ]Delay 1.5 sec before detecting ID code
Prefix number of Mailbox ID codeADM _ 5 _ 9920 _ [Function code]Refer to PBX programming

PBX PROGRAMMING:
[ PBX Software Versions 4.0 and Higher Only ]
Port number of EVM of Element in Item 03 of Class 01 must be defined Station port as  0 - 4 - 1 which means Voice Mail / Auto Attendant

Port number of EVM of Element in Item 04 of Class 01 must be configured as  0 which means Voice Mail / Auto Attendant Port

Camp-On Duration in Item 12 of Class 04 must be set  to [30] sec

Element 10 in Item 71 of Class 04 must be set to [ 3 ]:  DTMF speed is 100 ms on / 100 ms off for Voice Mail / Auto Attendant Port 
 
Element 11 in Item 71 of Class 04 must be set to [ 0 ]: In-Packet  No Pause Time for Voice Mail / Auto Attendant Port 

Function Code must be set for Element 02 in Item 77 of Class 04: Prefix number of Mailbox ID code
Example :  If Element 02 in Item 77 of Class 04 was set to [ * ],  then  EVM must set  ADM _ 5 _ 9920 _ [ ** ]

Function Code must be set for Element 09 in Item 77 of Class 04:  No-answer identified code
Example :  If Element 09 in Item 77 of Class 04 was set to [ #6 ],  then  EVM must set  SYS _ 6 _ 3 _ [ *1602 ]

Function Code must be set for Element 10 in Item 77 of Class 04: No-answer identified code
Example :  If Element 10 in Item 77 of Class 04 was set to [ #6 ],  then  EVM must set  SYS _ 6 _ 3 _ [ *1602 ]

Function Code must be set for Element 11 in Item 77 of Class 04: No-answer identified code
Example :  If Element 11 in Item 77 of Class 04 was set to [ #6 ],  then  EVM must set  SYS _ 6 _ 3 _ [ *1602 ]
Note : Element 09 , Element 10 and Element 11 in Item 77 of Class 04 must be set to the same Function Code

Function Code of  Message Waiting must be set for Element 19 in Item 06 of Class 07 :
For Message lamp on : [ Function Code of  Message Waiting ] + Extn
Example :  If Element 19 in Item 06 of Class 07 was set to [ #0 ],  then  EVM must set  SYS _ 6 _ 6 _ [ *10 ]

Function Code of Cancel must be set for Element 01 in Item 06 of Class 07 :
For Message lamp off : [ Function Code of Cancel ] + [ Function Code of  Message Waiting ] + Extn
Example :  If Element 01 in Item 06 of Class 07 was Set to [ *0 ]  then  EVM must set  SYS _ 6 _ 7 _ [ *10**0 ]

Port number of EVM must be set to Hunting Group 47 of Element in Item 02 of Class 08
  
Access Code of  EVM Hunting Group must be set to Hunting Group 47 of Element in Item 02 of Class 07
 
Port number of EVM of Element  must be set to [ 0 ]  in Item 13 of Class 10: No Pre-ringing for Single Line Telephone

Port number of All Extn of Element must be set to [ 0 ] in Item 43 of Class 10: Deny Off-hook Signaling

Port number of All Extn of Element must be set to [ 1 ] in  Item 45 of Class 10: Have Message Key

Port number of Trunk of Element in Item 34 of Class 11 must be set to [ Hunting Group 47 ]: DIL to Hunting Group of EVM

¡@