EVM  PROGRAMMING FOR NEC - NDK

EVM  PROGRAMMING  ITEMEVM  PROGRAMMING  DATA                EXPLANATION
For  op / ext ring duration during
working / closing hrs		SYS _ 2 _ 2 _ [00],SYS _ 2 _ 3 _ [00]
SYS _ 2 _ 4 _ [00],SYS _ 2 _ 5 _ [00]		Un-supervisory ringback tone                  
For release after answerSYS _ 5 _ 2 _ [5]ON HOOK
For release w / o waitingSYS _ 5 _ 3 _ [4]HOOK FLASH + ON HOOK
For retrieving call once error toneSYS _ 5 _ 4 _ [1]HOOK FLASH
For retrieving call once on busySYS _ 5 _ 5 _ [5]ON HOOK
For retrieving call once no answerSYS _ 5 _ 6 _ [5]ON HOOK
For message lamp onSYS _ 5 _ 7 _ [8]Function code + Extn
For message lamp offSYS _ 5 _ 8 _ [8]Function code + Extn
For no-answer identified codeSYS _ 6 _ 3 _ [ Function code ]Refer to PBX programming
For code of message lamp onSYS _ 6 _ 6 _ [ Function code ]Refer to PBX programming
For code of message lamp offSYS _ 6 _ 7 _ [ Function code ]Refer to PBX programming
For hook flash timeSYS _ 7 _ 1 _ [By auto detection ]Refer to EVM GUIDE:
How to auto detect hook flash time
For busy tone cycleSYS _ 7 _ 5 _ 1 _ [041]
SYS _ 7 _ 5 _ 2 _ [051]
SYS _ 7 _ 5 _ 3 _ [041]
SYS _ 7 _ 5 _ 4 _ [051]
Data in [ ] is just a reference		Refer to EVM GUIDE:
How to auto detect busy tone cycle
For ringback tone cycleSYS _ 7 _ 6 _ 1 _ [092]
SYS _ 7 _ 6 _ 2 _ [189]
SYS _ 7 _ 6 _ 3 _ [092]
SYS _ 7 _ 6 _ 4 _ [189]
Data in [ ] is just a reference		Refer to EVM GUIDE:
How to auto detect ringback tone cycle
Waiting time for ID codeADM _ 5 _ 9908 _ [ 0000 ]Delay 0.5 sec before detecting ID code

PBX PROGRAMMING :
DATA NO.47 in  LK1 of SYSTEM MODE:
     47:  2DG ( Function code ) = 502     Set function code of message lamp on
     47:  2DG ( Function code ) = 503     Set function code of message lamp off
     47:  2DG ( Function code ) = 020     Set Function code of no - answer forward
     47:  2DG ( Function code ) = 021     Cancel Function code of no - answer forward

DATA NO.22  in LK2 of SYSTEM MODE:
     22: FWD NOANS  12 Sec      Set  no - answer forward time

DATA NO.07 in LK3 of SYSTEM MODE:
     07: VM ACCESS = Function code      Set  no - answer forward ID code

DATA NO.08 in LK3 of SYSTEM MODE:
     08: VM DELAY = 0 Sec      Set  delay time of  ID code

DATA NO.10 in LK3 of SYSTEM MODE:
     10: VM  MF = 110 / 80 msec

DATA NO.15 in LK8 of SYSTEM MODE:
     15: ( 09 )   CWT = D       Set busy tone frequency to 400 Hz 


DATA NO. 35 of TELEPHONE MODE:     set [ EVM PORT ] / 35: V   MAIL   YES
DATA NO. 95 of TELEPHONE MODE:     set [ EVM PORT ] / 95: SLT = DTMF
DATA NO. 14 of TELEPHONE MODE:     set [ EVM PORT ] / 14: MSTER    YES
DATA NO. 15 of TELEPHONE MODE:     set [ EVM PORT1] / 15: IC   FWD  EXTN OF EVM PORT2
DATA NO. 15 of TELEPHONE MODE:     set [ EVM PORT2] / 15: IC   FWD  EXTN OF EVM PORT3
DATA NO. 15 of TELEPHONE MODE:     set [ EVM PORT3] / 15: IC   FWD  EXTN OF EVM PORT4
DATA NO. 01 of TELEPHONE MODE:     set [ EVM PORT ] / 01: RING DY for INCOMING RING

Set NO ANSWER FORWARD TO EXTN OF EVM for ALL EXTENSION

¡@

¡@

¡@