EVM  PROGRAMMING FOR  TOSHIBA DK-280 / 380

EVM  PROGRAMMING  ITEMEVM  PROGRAMMING  DATA                EXPLANATION
For  op / ext ring duration during
working / closing hrs
SYS _ 2 _ 2 _ [00],SYS _ 2 _ 3 _ [00]
SYS _ 2 _ 4 _ [00],SYS _ 2 _ 5 _ [00]
Un-supervisory ringback tone                  
For release after answerSYS _ 5 _ 2 _ [5]ON HOOK
For release w / o waitingSYS _ 5 _ 3 _ [5]ON HOOK
For retrieving call once error toneSYS _ 5 _ 4 _ [1]HOOK FLASH
For retrieving call once on busySYS _ 5 _ 5 _ [1]HOOK FLASH
For retrieving call once no answerSYS _ 5 _ 6 _ [1]HOOK FLASH
For message lamp onSYS _ 5 _ 7 _ [8]Function code + Extn
For message lamp offSYS _ 5 _ 8 _ [8]Function code + Extn
For no-answer identified code
( For no-answer recall )
SYS _ 6 _ 3 _ [ *3001 ]No-answer identified code is
B + Extn ( For no-answer recall )
For code of message lamp onSYS _ 6 _ 6 _ [ *163 ]Function code of message lamp on is
#63
For code of message lamp offSYS _ 6 _ 7 _ [ *164 ]Function code of message lamp off is
#64
For hook flash timeSYS _ 7 _ 1 _ [By auto detection ]Refer to EVM GUIDE:
How to auto detect hook flash time
For error tone cycleSYS _ 7 _ 4 _ 1 _ [026]
SYS _ 7 _ 4 _ 2 _ [026]
SYS _ 7 _ 4 _ 3 _ [026]
SYS _ 7 _ 4 _ 4 _ [026]
Data in [ ] is just a reference
Refer to EVM GUIDE:
How to auto detect error tone cycle
For busy tone cycleSYS _ 7 _ 5 _ 1 _ [048]
SYS _ 7 _ 5 _ 2 _ [045]
SYS _ 7 _ 5 _ 3 _ [048]
SYS _ 7 _ 5 _ 4 _ [045]
Data in [ ] is just a reference
Refer to EVM GUIDE:
How to auto detect busy tone cycle
For ringback tone cycleSYS _ 7 _ 6 _ 1 _ [096]
SYS _ 7 _ 6 _ 2 _ [280]
SYS _ 7 _ 6 _ 3 _ [096]
SYS _ 7 _ 6 _ 4 _ [280]
Data in [ ] is just a reference
Refer to EVM GUIDE:
How to auto detect ringback tone cycle
Waiting time for ID codeADM _ 5 _ 9908 _ [ 1000 ]Delay 1 sec before detecting ID code
Prefix number of Mailbox ID codeADM _ 5 _ 9920 _ [ Function code ]Refer To Extension Programming
For no-answer identified code
( For no-answer forward )
ADM _ 5 _ 9928 _ [ Function code ]Refer To Extension Programming

PBX PROGRAMMING:
Program [ 31 ]: set ON to KEY / LED 15 of All Extension Ports
                         Send DTMF "A"  out to Voice Mail from PBX when Extension Answering a call
                         Send  DTMF "D" out to Voice Mail from PBX when Extension Hanging up a call

Program [ 31 ]: set ON to KEY / LED 16 of All Extension Ports:
     Send  Forwarded ID Code out to Voice Mail from PBX when Extension Call Forwarded To Voice Mail
     Send Mailbox  ID Code out to Voice Mail from PBX when  pressing the Msg Button to Voice  Mail from Extension
                         
Program [ 31 ]: set ON to KEY / LED 17 of All Extensions Ports:
                         AA / VM is allowed to receive DTMF Code

Program [ 31 ]: set ON to KEY / LED 18 of All Extensions Ports: 
                         Disable override when Extension press " 3 " or Co line Button

Program [ 31 ]: set ON to KEY / LED 19 of All Extension Ports:
                         Send  DTMF B out to Voice Mail from PBX when Transfer Recall back to Voice Mail

Program [ 31 ]: set ON to  KEY / LED 20 of All Extension Ports:  
                         Send  DTMF " B + Extn " out to Voice Mail from PBX when Transfer Recall back to Voice Mail

Program [ 31 ]: set ON to KEY / LED 05 of EVM Extension Ports:
                        Set EVM Extension Ports to Voice Mail Group 1
 
Program [ 10 - 2 ]: set ON to KEY / LED 04:
                        Msg Cancel must be by sending out DTMF " # 64 + Extn " from Voice Mail
 
Program [ 10 - 2 ]: set OFF to KEY / LED 06:
                        Set DTMF Pause Time to 160 msec for Mailbox  ID Code

Program [ 33 ]: set Hunt To EVM Port 2  from EVM Port 1
Program [ 33 ]: set Hunt To EVM Port 3 from EVM Port 2
Program [ 33 ]: set  Hunt To EVM Port 4 from EVM Port 3

Extension Programming :
How To Set Forwarded ID Code:
1. press [ Intercom ] 
2. dial # 6 5 6 
3. Dial Forward ID Cod 
4. dial Your Own Extn 
5. press [ Redial ]
6. press [ Spkr ]
  Example : When set the Forward ID Code for Extension 200 
                  
1.  Press [Intercom ] 
                  2. dial # 6 5 6  
                  3. dial #6 (Forwarded ID code) 
                  4. dial 200  
                 5. press [ Redial ] 
                 6. press [ Spkr ]
                 If Forward ID Code is " #6, "  then set  EVM Programming ADM _ 5 _ 9928 _ [ *1602 ]     
  Note :  Set  Same Forward ID Code for All Extensions 

How To set Mailbox ID Code:
1. press [ Intercom ]  
2. dial # 6 5 7 
3. dial Mailbox ID Cod 
4. dial Your Own Extn 
5. press [ Redial ] 
6. press [ Spkr ]
  Example : When set the Mailbox ID Code for Extension 200 
                  
1.  Press [Intercom ] 
                  2. dial # 6 5 7 
                  3. dial *6 (Mailbox ID code) 
                  4. dial 200  
                 5. press [ Redial ] 
                 6. press [ Spkr ]
                 If Mailbox ID Code is " *6, "  then set  EVM Programming ADM _ 5 _ 9920 _ [ **6 ] 
    
  Note :  Set  Same Mailbox ID Code for All Extensions